Toyota Forklift 5FB30

Measure motor brush spring fatigue

Measure voltage of each battery cell after charging

Inspect magnet switch function, contact fouling and roughening in charger

Inspect installation status of the arc shooter

Inspect magnet contactor's function and timing

Inspect looseness of the coil mounting parts

Inspect loose main circuit lead installation

Measure controller overcurrent limit valve

Sign off on the electrical system inspection

Internal rubbers parts of power steering system replaced

Material handling hose replaced

Note: EPS actuator grease should be replaced every 4 years

Sign off on the 2 Year Replacement

Inspect loosening and damage of cylinder mounting

Inspect deformation and damage of rod and rod end

Inspect natural drop and natural forward tilt

Inspect cylinder oil leak and damage

Inspect wear and damage of pin and cylinder bearing

Inspect cylinder uneven movement

Inspect oil leak and abnormal sound in oil pump

Inspect cracks at fork root and welded part while forklift is new

Inspect wear and damage of mast support bushing

Inspect wear and damage of roller pins

Measure relief pressure in oil control valve

Inspect damage and cracks of frame, cross members, etc.

Retighten bolt looseness in body