Toyota Forklift 50-8FGU30

Inspect damage and cracks of frame, cross members, etc.

Inspect lock cylinder accumulator performance

Sign off on the safety devices maintenance

Inspect proper starting and abnormal noise of the main body

Measure rotating condition at idling in main body

Measure rotating condition during acceleration in main body

Inspect exhaust gas condition of main body

Measure valve clearance while forklift is new

Inspect clogging and damage in PCV valve and piping in PCV system

Measure RPM in governor which shall be in no-load mode

Inspect lubrication oil system for leakage, oil level, clogging and dirt of oil filter

- Inspect ignition timing for cracks on distributor cap

- Inspect ignition timing for spark plug burning and gap

- Inspect ignition timing distributor side terminal burning

- Inspect ignition timing distributor cap center piece wear and damage

- Inspect pinion gear meshing status

- Inspect electrical wiring for damage of wiring harness and fuses

- Inspect diesel engine key stop device function;

- Replace Torque converter oil filter

- Replace Wet brake cooling oil;

Measure play and reserve of brake pedal

Inspect operating force, braking effect, linkage and cable looseness and damage of the parking brake

Inspect braking effect of brake pedal

Inspect brake pipe for leak, damage and mounting condition

Inspect reservoir tank for leak and fluid level

Measure clearance between drum and lining on brake drum and brake shoe

Inspect wet brake's cooling oil level in tank