Toyota Forklift 40-8FD70N

Inspect draining of sedimenter in fuel system

Measure Stall and hydraulic pressure in torque converter & transmission

Clean hydraulic oil tank and oil strainer

Measure battery fluid specific gravity

Inspect pre-heater open circuit of glow plug

Sign off on the 1000 Hour / 6 Month Maintenance

Retighten exhaust system piping joint loosening and damage

Inspect exhaust emission control system sensor damage

Inspect exhaust emission control system injection cleaning and damage of 1FS

Inspect exhaust emission control system resistor damage of 1FS

Sign off on the engine system maintenance

Inspect Pinion gear meshing status

Inspect damage of wiring harness

Inspect proper starting and abnormal noise of the engine

Measure rotating condition at idling

Measure rotating condition during acceleration

Measure valve clearance while the forklift is new

Inspect engine ancillary drive belt tension, looseness and damage

Inspect clogging and damage in PCV valve and piping

Measure no-load maximum RPM of Governor

Inspect gas leak from fuel lines and fittings

Inspect damage of fuel lines and fittings

Clean tar removal from regulator

Inspect regulator adjustment status

Inspect leaks, damage and cracks of the tank

Inspect loose or damaged tank bracket

Inspect damage to electrical wiring, loose terminals

Inspect rotation of liquid drain valve

Inspect gas leak from the regulator body