Toyota Forklift 30-7FBCU18

Tighten cylinder mounting looseness and damage

Inspect rod and rod screw and rod end deformation and damage

Measure natural drop and natural forward tilt

Inspect cylinder for Oil leakage and damage

Inspect pin and cylinder shaft support wear and damage

Inspect Oil Pump for Oil leakage and unusual noise

Replace Tilt Steering Universal Joint Grease

Replace Differential & Planetary Gear Oil

Replace Master Cylinder Rubber Parts

Replace Wheel Cylinder Rubber Parts

Replace Hydraulic Return Oil Filter

Inspect tire cuts, damage and uneven treads

Inspect metal fragments, stones or other foreign objects in tires

Inspect front wheel bearing for unusual noise and looseness

Inspect rear wheel bearing for unusual noise and looseness

Measure Axle beam forward and backward direction looseness while it is new

Sign off on the equipment system maintenance

Voltage measurement of each battery cell after charging

Inspect Mounting condition of the arc shooter

Inspect Operating condition and timings of the magnetic contactor

Inspect Looseness of the coil mounting parts

Inspect Mounting condition of the main circuit lead wire looseness

Measure controller overcorrect limited value

Retighten bolt or nut looseness in drive unit

Retighten bolt or nut looseness in differential/planetary gear