Toyota Forklift 02-6FG30

- Inspect function, wear, damage, leak and mounting looseness in Master cylinder and wheel cylinder

- Inspect Wear of shoe sliding portion and lining

- Inspect Shoe operating condition

- Measure Return spring fatigue

- Inspect Automatic adjuster function

- Inspect Backing plate for deformation, cracks and damage

- Retighten Backing plate loose mounting;

Inspect proper starting and abnormal noise

Measure rotating condition at idling

Measure rotating condition during acceleration

Inspect PCV system for clogging and damage in PCV valve and piping

Measure no-load maximum RPM of governor

Inspect lubrication system for oil leaks

Inspect lubrication system oil level

Inspect loosening and damage of cylinder mounting

Inspect deformation and damage of rod, rod screw and rod end

Measure natural drop and natural forward tilt

Inspect for oil leaks and damage in the cylinder

Inspect for wear and damage of the pin and cylinder bearing

Inspect cylinder for uneven movement

Inspect for oil leaks and abnormal sound from the oil pump

Measure battery fluid specific gravity

Inspect open-circuit in open plug

Inspect open-circuit in intake heater

Sign off on the electric system maintenance

Inspect fork and stopper pin for abnormality

Inspect for misalignment between left and right fork fingers

Inspect each welded parts for deformation, damage, and cracks

Inspect mast and lift bracket for looseness

Inspect wear, damage, and rotating condition of rollers

Inspect mast trip for wear and damage

Inspect tension, deformation, and damage of chain

Inspect abnormality of chain anchor bolt