Southbend Range 436D-2GR

Ensure the oven by-pass flame has been adjusted

Place the thermocouple or thermometer in the middle of the oven

Remove dial and push out metal insert

Replace dial and turn to 400 mark

Remove, empty, and clean components

Ensure all thermostats and burner valves are in the 'OFF' position

Turn main gas valve to entire unit off

Remove valve panels and locate 1/8" plug in manifold

Remove plug and install a fitting appropriate to connect a manometer

Pressure Reading and Adjustment

Turn on main gas to unit and light pilots

Turn all burners and ovens to full 'ON' position

Ensure griddle by-pass flame has been adjusted

Verify cooking results indicate control is not maintaining temperatures

Use a test instrument with a DISC type thermocouple for surface temperature checking

Drop a couple of drops of oil on griddle surface plate and place thermocouple disc flat into the oil

Remove dial and push out metal insert

Replace dial, turn to 350 mark, and light burner

Clean around burner air mixers and orifices if lint has accumulated

Visually assure proper pilot operation