

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Multiquip Portable Generator DCA70SSJU4I
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Coolant Replacement
Warning: Allow engine to cool when flushing out radiator. Flushing the radiator while hot could cause serious burns from water or steam.
Open both cocks located at the crankcase side and at the lower part of the radiator and drain coolant. Open the radiator cap while draining.
Remove the overflow tank and drain.
Check hoses for softening and kinks.
Check clamps for signs of leakage.
Tighten both cocks and replace the overflow tank.
Replace with coolant as recommended by the engine manufacturer.
Close radiator cap tightly.
Flush the radiator by running clean tap water through radiator until signs of rust and dirt are removed. DO NOT clean radiator core with any objects, such as a screwdriver.
10 Hourly / 1 Daily Portable Generator Maintenance
Engine:
Check Engine Oil and Coolant Levels
Check Fuel Filter/Water Separator Bowl
Check Air Cleaner
Check Air Cleaner Element
Check for Leaks/Hoses/Clamps
Check for Loosening of Parts;
500 Hourly / 12 Monthly Portable Generator Maintenance
Engine:
Replace Fuel Filter Elements
Replace the fuel filter cartridge with new one every 500 hours or so.
Loosen the drain plug at the lower top of the fuel filter. Drain the fuel in the fuel body together with the mixed water. DO NOT spill the fuel during disassembly.
Vent any air.
Check Engine Mounts
Service Battery
Check Air Intake Hoses
Check Fan Belt Condition
3000 Hourly / 36 Monthly Portable Generator Maintenance
Warning: This maintenance check requires trained personnel with PPE!
Test Thermostats
Check and Adjust Engine Valve Clearance
Test Glow Plugs
Inspect Diesel Particulate Filter (DPF) *2
Expectation for minimal service interval will be at least 3000 hrs. based on engine power. However, actual service should take place when indicated by diagnostic gauge.
Please contact nearest authorized Multiquip Service Center for DPF Cleaning.
Sign off on the generator maintenance
Oil Filter Replacement
Warning: Ensure the engine is off and cool before starting the procedure
Old oil filter removed
Film of oil applied to the gasket on the new oil filter
New oil filter installed
Engine run and checked for leaks
Engine oil level after replacement
Excessive oil cleaned from engine
Sign off on the oil filter replacement
Access the parts list for your equipment in MaintainX.
Cartridge, Oil Filter
RE504836
Cartridge, Fuel Filter
RE544394.
Cartridge, Fuel Prefilter
RE541922
Cartridge, Blow-By Filter
RE540710
Element, Air
602046365
Cartridge, Oil Filter
RE504836
Cartridge, Fuel Filter
RE544394.
Cartridge, Fuel Prefilter
RE541922
Cartridge, Blow-By Filter
RE540710
Element, Air
602046365
Cartridge, Oil Filter
RE504836
Cartridge, Fuel Filter
RE544394.
Cartridge, Fuel Prefilter
RE541922
Cartridge, Blow-By Filter
RE540710
Element, Air
602046365
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













