Micro Bird Bus Blue Bird Bus

Ensure all windows and mirrors are clean

Wipe clean all school bus stop sign and lights, as well as brake lights

Ensure the tail pipe is not obstructed by snow or mud

Ensure the bus interior is clear and clean

Make sure that all seat belts are fastened

Remove the glass from the door using a cutting knife to remove sealant (outside and inside)

Take off all extra tape and sealant

Clean off with alcohol to remove any dirt or grease

Install butyl tape all around the interior of lift door

Stick glass onto butyl tape and press in place

Seal all around the interior of the door glass (bottom, top and both sides)

Ensure you have the correct replacement glass

Cut and remove outside sealant around the frame

Remove the 6 screws fixing the window frame to the bows (G5 models)

Remove the 6 screws and the piece called a 'between' (MBII models)

Pull the window from inside the bus

Clean or replace evaporator return air filters

Inspect refrigerant hoses and fitting connections

Check the adjustment of the passenger entrance door leaves and the condition of the system main components

Are all bolts on the door frames in place and correctly tightened?

Test all emergency release handles inside and outside the bus. Repair immediately if needed.

Check seat belt buckles for adjustability and correct operation

Is the fire extinguisher fully charged and first aid kit complete?

Clean roof hatch with mild soap and spray silicone lubricant on moving parts.

Oil all hinges and window latches, lubricate window channels with silicone.

Clean all rubber door seals and lubricate with rubber lubricant.