KSB SE & Co. KGaA Chemical Pump CPKN 40-250

Ensure maintenance work is performed outside potentially explosive atmospheres.

Verify that the pump set cannot be started up unintentionally.

Disconnect electrical connections before starting work on the pump set.

Secure the pump set to prevent tipping or falling over during assembly/dismantling.

Ensure all maintenance work is performed by authorised, qualified specialist personnel.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Ensure compliance with safety regulations at the installation site.

Perform maintenance outside potentially explosive atmospheres.

Ensure maintenance is performed by authorized, qualified personnel.

Disconnect electrical connections before starting work on the pump set.

Secure the pump to prevent tipping or falling during assembly/dismantling.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.

Ensure the pump set cannot be started unintentionally.

Ensure all safety regulations at the place of installation are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Take appropriate measures to protect persons and the environment when draining fluids.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Ensure maintenance, inspection, and installation work is performed by authorised, qualified specialist personnel.

Ensure all safety regulations at the installation site are observed.

Perform maintenance work on explosion-proof pump sets outside potentially explosive atmospheres.

Ensure the pump set cannot be started up unintentionally.

Disconnect electrical connections before carrying out work on the pump set.

Take appropriate measures to protect persons and the environment when draining fluids.

Secure the pump set/pump parts to prevent tipping or falling over during assembly/dismantling.

Maintenance Schedule Preparation

Prepare a maintenance schedule with emphasis on lubricants, shaft seal, and coupling.

Ensure maintenance work is performed outside potentially explosive atmospheres.

Verify that the pump set cannot be started up unintentionally.

Disconnect electrical connections before starting work on the pump set.

Secure the pump set to prevent tipping or falling over during assembly/dismantling.

Ensure maintenance is performed by authorised, qualified specialist personnel.

Prepare a maintenance schedule focusing on lubricants, shaft seal, and coupling.