KICE Rotary Airlock VBXS 20x15

Verify motor model compatibility

Review safety instructions provided by the manufacturer

Review service instructions provided by the manufacturer

Contact local dealer or service representative for parts or service

Was there difficulty obtaining service or repair components?

Contact Kice Customer Service Department if service or repair components are not obtainable

Turn off airlock and remove all potential energy sources following SOPs and lockout/tagout procedures before removing chain guard cover.

Confirm the sprockets are in good condition and teeth are not excessively worn.

Confirm the chain is free of grit and debris and is in good condition.

Verify all three sprockets are aligned in the same plane.

Enter the shaft center distance in inches.

Ensure all energy sources are locked and tagged out in compliance with 29 CFR 1910.147, local enforcement authorities, OSHA, and facility safety practices.

Review all Safety Precautions noted in the manual before performing maintenance on equipment.

Refer to Appendix 10 for clearance information.

Turn off the airlock and remove all potential energy sources following SOPs and lockout/tagout procedures.

Remove the airlock from system to obtain unobstructed access to rotor.

Place a block in the airlock to prevent the rotor from turning unexpectedly.