Hoshizaki Self-Contained Cuber AM-50BAE-AD

Ensure only qualified service technicians perform the maintenance.

Move the control switch to the 'OFF' position and unplug the icemaker.

Verify hands are dry before touching the control switch or plug.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance.

Check that no wires are pinched between the panels and icemaker.

Ensure the water supply line, drain line, and power cord are not damaged or pinched.

Ice Storage Bin Drain Maintenance

Move the control switch to the 'OFF' position.

Wear liquid-proof gloves and goggles

Ensure no ammonia type cleaners are used

Follow instructions on cleaning and sanitizing solution bottles

Dilute 5 fl. oz. of Hoshizaki 'Scale Away' with 1 gallon of warm water

Remove all ice from the evaporator and ice storage bin

Move control switch to 'OFF' position

Ensure only qualified service technicians perform the service.

Move the control switch to the 'OFF' position.

Unplug the icemaker from the electrical outlet.

Confirm hands are dry before touching the control switch or plug.

Clean the scoop using a neutral cleaner.

Rinse the scoop thoroughly after cleaning.

Ensure only qualified service technicians service this icemaker

Move the control switch to the 'OFF' position

Unplug the icemaker from the electrical outlet

Avoid touching the control switch or plug with damp hands

Ensure all components, fasteners, and thumbscrews are securely in place

Verify that no components have fallen into the ice storage bin

Ensure only qualified service technicians perform the service.

Move the control switch to the 'OFF' position and unplug the icemaker.

Are your hands dry before touching the control switch or plug?

Measure the pressure of the external water filters.

Is the pressure within the normal range?

Change the external water filters if necessary.