Hoshizaki Modular Flaker F-1501MAJ-C

Ensure only qualified service technicians service the appliance

Avoid touching the icemaker power switch or control switch with damp hands

Move the icemaker's power switch to the 'OFF' position

Place the disconnect in the off position

Lockout/Tagout to prevent the power supply from being turned back on inadvertently

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance

Ensure only qualified service technicians are servicing the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Perform Lockout/Tagout to prevent power supply from being turned back on inadvertently.

Is the wear on the upper bearing within factory recommendations?

Is the wear on the lower bearing within factory recommendations?

Are the mechanical seal's contact surfaces free from wear, cracks, or scratches?

Replace the upper bearing if wear exceeds factory recommendations.

Replace the lower bearing if wear exceeds factory recommendations.

Ensure only qualified service technicians are servicing the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance

Inlet Water Valve and Drain Valve

Close the water supply line shut‑off valve

Clean the inlet water valve screen

Clean and inspect the drain valve