Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Kaeser Screw Compressor BSD40

Create an account to install this asset package.

Maintenance Plans for Kaeser Screw Compressor Model BSD40

Integrate maintenance plans directly into your work orders in MaintainX.

1000 Hourly Screw Compressor Maintenance

Clean the cooler

Regular cleaning of the cooler ensures reliable cooling of the machine and the compressed air. The frequency is mainly dependent on local operating conditions.

A leaking cooler results in loss of cooling oil and compressed air.

Material:

Brush and vacuum cleaner.

Breathing mask (if required).

Precondition:

The power supply disconnecting device is switched off.

The disconnecting device is locked in the off position.

Run this procedure

12000 Hourly / 3 Yearly Fan Motor Bearings Check

Warning: Only an authorized KAESER Service Technician should carry out service work.

Have service tasks carried out punctually taking ambient and operating conditions into account.

Fan motor bearings check

Technician's signature

Run this procedure

12000 Hourly Valves Check

Warning: Only an authorized KAESER Service Technician should carry out service work.

Have service tasks carried out punctually taking ambient and operating conditions into account.

Enter the current operating hours of the machine

Valves check completed successfully

Technician's signature

Run this procedure

1 Weekly Screw Compressor Maintenance

Check the cooling oil level Control cabinet:

In frequency-controlled compressors (SFC) the oil level indicator is only accurate when the machine is running at or near maximum speed.

The higher the speed, the lower the pressure at the compressed air outlet. The SIGMA CONTROL displays this valve.

Precondition The machine has been running at least 5 minutes under LOAD.

WARNING: Danger of burning from hot surfaces!

> Wear long-sleeved clothing and protective gloves.

> Check the oil level with machine running.

Result Top up when the indicator shows minimum level.

Check the filter mat

Run this procedure

1 Yearly Screw Compressor Maintenance

Safety Warning: The machine must be isolated from the compressed air system and completely vented before undertaking any work on the pressure system.

Material: Replacement part, Cooling oil container

Precondition: The power supply disconnecting device is switched off, The disconnecting device is locked in the off position, A check has been made no voltage is present, The machine is fully vented, the pressure gauge reads 0 psig.

WARNING: There is risk of burns from hot components and oil. Wear long-sleeved clothing and gloves.

Change the oil filter

Start the machine and carry out a test run

Check the safety relief valve

Check the overheating safety shutdown function

Check the cooler for leaks

Run this procedure