Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Kaeser Screw Compressor BSD50

Create an account to install this asset package.

Maintenance Plans for Kaeser Screw Compressor Model BSD50

Integrate maintenance plans directly into your work orders in MaintainX.

1000 Hourly Screw Compressor Maintenance

Clean the cooler

Regular cleaning of the cooler ensures reliable cooling of the machine and the compressed air. The frequency is mainly dependent on local operating conditions.

A leaking cooler results in loss of cooling oil and compressed air.

Material:

Brush and vacuum cleaner.

Breathing mask (if required).

Precondition:

The power supply disconnecting device is switched off.

The disconnecting device is locked in the off position.

Run this procedure

12000 Hourly / 3 Yearly Fan Motor Bearings Check

Warning: Only an authorized KAESER Service Technician should carry out service work.

Have service tasks carried out punctually taking ambient and operating conditions into account.

Fan motor bearings check

Technician's signature

Run this procedure

12000 Hourly Valves Check

Warning: Only an authorized KAESER Service Technician should carry out service work.

Have service tasks carried out punctually taking ambient and operating conditions into account.

Valves checked and functional

Technician's signature

Run this procedure

1 Weekly Screw Compressor Maintenance

Warning: Wear long-sleeved clothing and protective gloves to avoid burns from hot surfaces!

Check the cooling oil level Control cabinet

Note: In frequency-controlled compressors (SFC) the oil level indicator is only accurate when the machine is running at or near maximum speed.

Precondition: The machine has been running at least 5 minutes under LOAD.

Is the oil level at minimum?

If yes, top up the oil level.

Check the filter mat

Precondition: The power supply disconnecting (isolating) device is switched off, the disconnect device is locked in the off position, a check has been made that no voltage is present. The machine has cooled down.

Are the filter mats clogged?

Run this procedure

1 Yearly Screw Compressor Maintenance

WARNING: There is risk of burns from hot components and oil. Wear long-sleeved clothing and gloves.

Is the machine isolated from the compressed air system and completely vented?

Is the power supply disconnecting device switched off and locked in the off position?

Has a check been made no voltage is present?

Is the machine fully vented, does the pressure gauge read 0 psig?

Change the oil filter

Dispose of parts and materials contaminated with oil in accordance with environmental protection regulations.

Start the machine and carry out a test run

Check the safety relief valve