Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Kaeser Air Compressor ASD 30

Create an account to install this asset package.

Maintenance Plans for Kaeser Air Compressor Model ASD 30

Integrate maintenance plans directly into your work orders in MaintainX.

1000 Hourly Air Filter Check

Warning: Ensure the power supply disconnecting device is switched off and locked in the off position. Make sure no voltage is present and the machine has cooled down.

Air filter check

Do not clean the air filter element with liquids. Check that all sealing surfaces match each other. The use of an unsuitable air filter element can permit dirt to ingress the pressure system and cause damage to the machine.

Enter the name of the replacement part used

Sign off on the air filter check

Run this procedure

1000 Hourly Cooler Cleaning

Warning: This cleaning procedure requires trained personnel with PPE!

Is the cooler in good condition?

If the cooler is leaking, report the issue to the maintenance team and stop the procedure

Was the cooler cleaned successfully?

Enter the machine's hour meter reading

Sign off on the cooler cleaning

Run this procedure

1000 Hourly Cooling Air Filter Mat Cleaning (Option K3)

Warning: Ensure the machine is switched off before starting the procedure.

Filter mat removed from the retaining frame

Loose dirt removed from the filter mat

Was the filter mat washed with lukewarm water and household detergent?

Was the filter mat changed?

Filter mat inserted back in the retaining frame

Sign off on the filter mat cleaning

Run this procedure

1000 Hourly Refrigerant Condenser Cleaning

Precondition: The power supply disconnecting device is switched off. The disconnecting device is locked in the off position. A check has been made that no voltage is present.

Power supply disconnecting device is switched off and locked in the off position

Check that no voltage is present

Undo the securing screws 5

Remove the panel 1

Run this procedure

1 Weekly Condensate Drain Check

Precondition: Machine running under LOAD

Does the LED light up when condensate begins to drain?

Visual check: Does condensate flow as soon as the LED illuminates?

If condensate does not drain, the condensate drain hose or the drain itself is blocked.

Switch off the machine and clean the drain pipe.

Condensate drain manual check: Did condensate flow when the «TEST» button was held for at least 2 seconds?