Hatco Decorative Heat Lamp DLH-2200-RR

Is the lamp at the proper height before tightening set screws?

Slide the stem up or down to the desired length.

Tighten set screws securely (at least 12 ft-lbs.) to avoid electric shock hazard.

Ensure screws penetrate paint and contact bare metal for grounding.

Use the included threadlocker and set screws to secure the stem length.

Tighten set screws securely (at least 12 ft-lbs.).

Read all safety messages in the Important Safety Information section before operating the equipment.

Move the I/O (on/off) Switch to the I (on) position.

Move the I/O (on/off) Switch to the O (off) position.

Operating Retractable ‘R’ and ‘RT’ Units

Turn OFF power at fused disconnect switch/circuit breaker and allow unit to cool before cleaning.

Ensure the unit has not been submerged or saturated with water.

Move the I/O (on/off) Switch to the O (off) position and allow the unit to cool completely.

Wipe down the lamp shade with a clean, soft, water-dampened cloth.

Use a mild, non-abrasive cleanser for stubborn stains.

Verify that no water has been used excessively on the unit.

Move the I/O (on/off) Switch to the O (off) position.

Has the bulb cooled completely?

Identify the type of Decorative Lamp

Is the replacement bulb wattage appropriate for the lamp type?

Unscrew the old bulb from the unit.