Hamilton Waterjet HJ322

Salt Spray Exposure Maintenance

Have the MECS modules been exposed to salt spray?

Rinse the modules with clean fresh water

Check the condition of the O-Ring Seals

Lubricate O-Ring Seals with silicone grease

Ensure control modules are firmly bolted to the console

Check that the mounting gaskets are sealing correctly

Check the oil level on the JHPU Filler Cap/dipstick.

Top up with the correct grade oil if necessary.

Visually inspect the condition of the oil.

Is the oil discoloured, contaminated, or does it smell unusual?

Visual Inspection of Jogstick Rubber Boot

Inspect the Jogstick rubber boot for any signs of damage

Is the Jogstick rubber boot free from damage?

Replacement of Damaged Rubber Boot

Replace the Jogstick rubber boot if damaged

Is the Control Panel waterproof after replacement?

Inspect all feedback sensors for issues

Is there a suspected fault with any sensor?

Replace the sensor if a fault is suspected

Inspect hoses for the following issues

Is reconditioning or repair necessary?

Describe the reconditioning or repair actions taken