General Motors Car SRX

Warning: Ensure the vehicle is turned off and parked on a flat surface.

Remove the air cleaner/filter cover

Lift the air cleaner/filter assembly base to disengage from the three pins

Sign off on the headlamp passenger side replacement

Wheel cover or center cap removed

Wheel nut caps loosened and removed

Cover or center cap stored in the cargo area

Ensure jack lift head is in the correct position

Jack lift head positioned at the jack location nearest the flat tire

Warning: Never get under a vehicle when it is supported only by a jack

Engine Compartment Overview -> 242 for the location of the engine air cleaner/filter.

Maintenance Schedule -> 332 for intervals on changing and inspecting the engine air cleaner/filter.

Engine air cleaner/filter housing and nearby components are free of dirt and debris.

Engine air cleaner/filter is not damaged.

Warning: Do not clean the engine air cleaner/filter or components with water or compressed air.

Open the hood. See Hood -> 241.

Locate the air filter housing on the front passenger side of the engine compartment. See Engine Compartment Overview -> 242.

Outlet duct disconnected by loosening the air duct clamp (1).

Electrical connector (2) disconnected.

Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation -> 292.

Check engine oil level and oil life percentage. If needed, change engine oil and filter, and reset oil life system. See Engine Oil -> 243 and Engine Oil Life System -> 246.

Check engine coolant level. See Engine Coolant -> 249.

Visually check for fluid leaks.

Inspect brake system. See Exterior Care -> 321.

Visually inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear. See Exterior Care -> 321.

Check restraint system components. See Safety System Check -> 68.

Visually inspect fuel system for damage or leaks.

Visually inspect exhaust system and nearby heat shields for loose or damaged parts.

Warning: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.

Be ready to apply the regular brake immediately if the vehicle begins to move.

Ignition turned on without starting the engine

Shift lever does not move out of P (Park) without applying the regular brake

If the shift lever moves out of P (Park), contact your dealer for service.

Sign off on the shift lock control function check