GEA Plate-Forming Machine CRM-600

- Do not attempt to use the machine unless you have read and understood all the information in the safety chapter and you are sure of your ability to use the machine safely

- Do not attempt to use the machine unless you know how to stop it in an emergency as described under emergency stop in the safety chapter.

Important conditions for safe operation without problems are: - accurate, continuous inspections

- following all safety instructions.

- Switch off and lock the main switch before cleaning.

Warning!: Do not change the alignment of the guiding of the guiding blocks.

Warning: Switch off and lock the main switch before inspection and maintenance work. Wait at least two minutes after switching off before carrying out repair work on electrical components.

Inspect the form plate for cracks.

Caution: Dispose of a cracked form plate. Never install a cracked form plate in the machine.

Inspect all plates for scratches, burrs, grooves and sharp edges.

Sign off on the plates maintenance

Warning: Do not attempt to clean the machine unless you have read and understood all the first aid procedures that apply to your workspace and to the cleaning products that will be used

If there is any safety instruction or procedure that you do not understand, do not clean this machine. Contact a supervisor and arrange for proper training on the cleaning of the machine

Cleaning the machine without understanding and following all the safety instructions and procedures could lead to serious injury to yourself or others.

Switch off and lock the main switch before cleaning.

Cover the control panel prior to cleaning.

Never spout directly at electrical components, bearings and chains.

Always wear the acquired protective clothing

Take care not to slip on the wet or greasy floor. It is recommended to wear protective shoes.

Always apply to the prescribed protective means. Refer to the label and the safety regulations on the package

Warning: Do not attempt to use the machine unless you have read and understood all the information in the safety chapter and you are sure of your ability to use the machine safely

Do not attempt to use the machine unless you know how to stop it in an emergency as described under emergency stop in the safety chapter.

Important conditions for safe operation without problems are: accurate, continuous inspections and following all safety instructions.

Warning: Switch off and lock the main switch before cleaning.

Warning: Do not attempt to use the machine unless you have read and understood all the information in the safety chapter and you are sure of your ability to use the machine safely

Warning: Do not attempt to use the machine unless you know how to stop it in an emergency as described under emergency stop in the safety chapter.

Important conditions for safe operation without problems are: accurate, continuous inspections and following all safety instructions.

Warning: Switch off and lock the main switch before cleaning. Refer to chapter 1: Safety. Avoid a mixture of different lubricants. Choose lubricants, adapted to the ambient temperature.

Warning: Turn off the hydraulic unit before maintenance or repair tasks.

Oil temperature hydraulic system: Temperature - Check

Oil level outfeed conveyor drive unit: Level - Check

Oil level outfeed conveyor drive unit: Add oil, if necessary

Oil level outfeed conveyor drive unit: Search for leaks