Epson Multimedia Projector VS250

Warning: Ensure the projector is turned off and unplugged before starting the cleaning process.

Upload a photo of the dusty air filter or vents

Was the dust gently removed using a small vacuum or a very soft brush?

Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.

Caution: Do not use canned air. The gases may leave a flammable residue or push dust and debris into the projector's optics or other sensitive areas.

Is the air filter clean and undamaged?

Sign off on the air filter and vents cleaning

Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.

Remove the battery cover as shown.

Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury.

Insert the batteries with the + and– ends facing as shown.

Replace the battery cover and press it down until it clicks into place.

Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.

Sign off on the battery replacement

Warning: Ensure the projector is turned off and unplugged before starting the procedure.

Is the air filter torn or damaged?

Upload a photo of the current air filter

Dispose of used air filters according to local regulations.

Upload a photo of the new air filter in place

Did the new air filter click into place?

Sign off on the air filter replacement

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord.

Warning: Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.

Warning: Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to qualified servicers.

Before cleaning the projector case, turn off the projector and unplug the power cord.

Did you use a soft, dry, lint-free cloth to remove dust or dirt?

Did you use a soft cloth moistened with water and mild soap to remove stubborn dirt?

Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector case. These can damage the case.

Caution: Do not use canned air, or the gases may leave a flammable residue.

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord.

Warning: Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.

Warning: Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to qualified servicers.

Cleaning the Lens: Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.

Lens cleaned without using any harsh materials or subjecting the lens to any impacts

Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.

Caution: Do not use canned air, or the gases may leave a residue. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.

Sign off on the projector lens cleaning