Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Core Health & Fitness Training Machine Gauntlet 8 Series
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1 Daily Training Machine Maintenance
Check Safety & Warning Labels
Spot Check Step Chains
Wipe Down Side Covers
Clean Console - Clean with water dampened cloth and dry after cleaning
Inspection
Inspect the frame for any rust, bubbling, or paint chips during the daily cleaning. The salt in perspiration can damage the unpainted surfaces. Repair the damaged area with a touch-up paint kit.
Preventive Maintenance Cautions
While maintaining equipment you will want to avoid spraying any liquids directly onto any surface of the unit. Always spray cleaning solutions onto a clean towel first then wipe the unit.
While vacuuming the floor area using an upright vacuum, avoid getting the power cord caught in the beater-brush of the vacuum.
1 Monthly Training Machine Maintenance
Warning: This maintenance check requires trained personnel with PPE!
Enter the Alternator Belt Tension in in-lbs
Did the Alternator Belt Tension fall within the 40-54 in-lbs range?
Was the Drive Chains lubricated with 30W Motor Oil?
Was the Bearing Plate lubricated with White Lithium Grease?
Sign off on the machine maintenance
Access the parts list for your equipment in MaintainX.
Nut, 3/8-16, Nylok Hex
110-1830
Nut, 5/16-18, Nyloc
110-1871
Nut, 3/8-16, Shn, Cs, Zp, Gr 5
110-3480
Washer, Plain, Id: .375", Od: .875", Th: .06", Cs, Ecb
120-3330
Pin, Cotter, Ø.12" Wire, 1/2"-5/8" Shaft, Cs, Zp
140-3494
Nut, 3/8-16, Nylok Hex
110-1830
Nut, 5/16-18, Nyloc
110-1871
Nut, 3/8-16, Shn, Cs, Zp, Gr 5
110-3480
Washer, Plain, Id: .375", Od: .875", Th: .06", Cs, Ecb
120-3330
Pin, Cotter, Ø.12" Wire, 1/2"-5/8" Shaft, Cs, Zp
140-3494
Nut, 3/8-16, Nylok Hex
110-1830
Nut, 5/16-18, Nyloc
110-1871
Nut, 3/8-16, Shn, Cs, Zp, Gr 5
110-3480
Washer, Plain, Id: .375", Od: .875", Th: .06", Cs, Ecb
120-3330
Pin, Cotter, Ø.12" Wire, 1/2"-5/8" Shaft, Cs, Zp
140-3494
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













