Bobcat Side Discharge Mower 942295

Warning: Do not wash the cartridge or use compressed air which can cause damage.

Enter the hours on the machine's hour meter

Is the cartridge clean after tapping gently?

Is the cartridge bent or damaged?

Upload a photo of the cartridge

Sign off on the cartridge check

Check oil level with the dipstick

Replace dipstick before starting engine

Warning: This check requires trained personnel with PPE!

Engine starts and runs at 1/2 throttle with operator raised off the seat

Engine stops within 1/2 second when parking brake is moved to OFF position with operator raised off the seat

Engine stops within 1/2 second when traction lever is moved out of neutral lock position with operator raised off the seat

Engine stops within 1/2 second when blades are turned on with operator raised off the seat

Did the Operator Presence Interlock System operate correctly in start or run?

If the Operator Presence Interlock System did not operate correctly, repair machine before using and contact your authorized CGC, Inc. dealer.

Sign off on the Operator Presence Interlock System check

Ensure the exterior of the transaxle is free of debris before starting the procedure

Remove the three 1/4\ filter guard screws and filter guard A"

Remove the oil filter B from the transaxle and discard

Dispose of used oil in accordance with local requirements

Wipe the filter base surface off

Apply a film of new oil to the gasket of the new replacement filter

Install the new filter by hand, turn 3/4 to one full turn after the filter gasket contacts the filter base surface

Re-install the filter guard and torque the three screws to 65 in. lbs. each

Engines equipped with dual element air cleaners have a paper air cleaner element with an oiled, foam precleaner element on the dirty side of the paper element. Both should be inspected regularly and maintained.

Clean and re-oil precleaner element every 25 hours (more often under dusty conditions).

Wash precleaner in kerosene or liquid detergent and water.

Wrap precleaner in cloth and squeeze to remove cleaner.

Saturate precleaner in engine oil. Squeeze to remove excess oil.

Re-install precleaner. Reassemble air cleaner components and screw assembly down tight.

Sign off on the precleaner element cleaning