Bobcat Loader T76

Check condition of Accessory Drive Belt (Alternator, air conditioning, water pump). Replace as needed

Check the function of the lift arm bypass control in Bobcat Interlock Control System (BICS)

Check cables of Battery and connections

Sign off on the loader maintenance

Lubricate with multipurpose lithium based grease

Check the condition of seat belt

Clean or replace seat belt retractors as needed

Check the seat bar and control interlocks for correct operation

Clean dirt and debris from moving parts

Check for correct function of Bobcat Interlock Control System (BICS)

Lift and Tilt functions MUST NOT operate with seat bar raised

Check for damaged tires and correct air pressure. Inflate to MAXIMUM pressure shown on the sidewall of the tire

Warning: This check should be performed every 10 hours or daily for the first 30 hours, then as scheduled.

Enter the torque after tightening the wheel nuts

- Check display of Engine Air Filter and Air System

- Check for leaks and damaged components

- Check the display of Fuel Filter

- Remove the trapped water or replace the main fuel filter element as indicated;

Check for damage and leaks Hydraulic Hoses and Tubelines

Repair or replace as needed for Hydraulic Hoses and Tubelines

Check fluid levels for Final Drive Transmissions (Chaincases)

Add as needed for Final Drive Transmissions (Chaincases)

Check for correct operation Parking Brake

Repair or adjust as needed for Parking Brake

Check for correct operation Foot Pedals

Repair or adjust as needed for Foot Pedals

Check for correct operation Hand Controls and Steering Levers, or Joysticks