Bobcat Loader T250

Remove trapped water in fuel filter

Lubricate Bob-Tach Pivot & Wedges

Lubricate Steering Cylinders (Aws Machines Only)

Check function of Seat Bar And Control Interlocks

Clean dirt and debris from moving parts of Seat Belt, Seat Bar And Control Interlocks

Replaced fluid on Hydraulic Reservoir

Replaced fluid on Final Drive Transmission (Chaincase On Wheel Machines Only)

Replaced fluid (If required) in Track Roller, Idler Assemblies (Track Machines Only)

Replaced Drive Motor Case Drain Filter (If equipped)

Repacked wheel bearings, greased internal splines in hub yoke. (Dealer Service Only) Wheel Bearing & Outer Splines (Aws Only)

Sign off on the 1000 Hours Loader Maintenance

Empty spark chamber. (If equipped Spark Arrestor Muffler.)

Check battery for damage, hold down clamps, cables, connections and electrolyte level. Add distilled water as needed

Lubricate drive line Engine-to-Pump Coupler with multipurpose lithium based grease. (If equipped.)

Sign off on the loader maintenance

Fan / Hydraulic / Hydrostatic System filter replaced

Reservoir breather cap replaced

Steering Valve Inline Filter (Aws Only) replaced

Oil in Hydrostatic Motor Carrier (Track Machines Only) replaced

Sign off on the 500 Hours Loader Maintenance

Check hydraulic fluid level and add if required

Check for damage and for leaks hoses and tubelines. Repair or replace as needed

Check fluid level of Final Drive Transmission (Chaincase, Wheel Machines Only) and add if required

Check for correct operation of Hydraulic & Steering Controls (Pedals, Hand, And/ Or Joystick). Adjust as needed

Check for loose nuts and tighten as needed Wheel Nuts / Track Drive Sprockets

Check tension and adjust as needed Track Tension (Track Machines Only)

Sign off on the 50 Hours Loader Maintenance