XLT Ovens Gas Oven 3255

Ensure the oven is cool and unplugged before starting the cleaning process.

Confirm that no high pressure water will be used for cleaning.

Select the cleaning agents to be used

Ensure no bleach or caustic cleaners are used on stainless steel surfaces.

Ensure no caustic cleaners are used on the conveyor bearings.

Ensure no abrasive cleaners or pads are used on stainless steel surfaces.

Ensure the oven is cool and the electric cord is unplugged.

Use caution when lifting shroud panels due to their weight.

Avoid spraying liquid cleaning agents in the hood electrical box and User Interface.

Ensure the oven is cool and the electric cord is unplugged

Verify that no liquid cleaning agents are sprayed in the hood electrical box or User Interface

Check application restrictions on product label

Ensure bleach is not used for cleaning

Ensure no abrasive or caustic cleaners are used

Spray areas with heavy buildup and allow to soak for up to five minutes before wiping clean

Wipe with the 'grain' of the surface to maintain appearance

Ensure the oven is cool and unplugged

Disconnect hood relocations cord (if applicable)

Ensure the oven is cool and unplugged before starting maintenance.

Use caution when lifting shroud panels due to their weight.

Avoid using the following cleaning agents

Spray areas with heavy buildup and allow to soak for up to five minutes before wiping clean.

Wipe with the grain of the surface to maintain appearance.

Ensure no liquid cleaning agents are sprayed in the hood electrical box or User Interface.