Toyota Forklift 02-7FGA50

Warning: Use only genuine Toyota parts for replacement parts, and use the recommended types of lubricants.

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.

Enter the current machine hour meter reading

Upload a photo of the replaced part

Sign off on the swing lock cylinder replacement

Warning: This lubrication procedure requires trained personnel with PPE!

Gear shift link inspection and service

Oil pump spline shaft inspection and service

Gear shift lever inspection and service

Tilt steering locking mechanism inspection and service

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.

Sign off on the forklift lubrication

Warning: Only trained personnel should perform this procedure

Did you use only genuine Toyota parts for replacement parts?

Did you use the recommended types of lubricants?

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.

Sign off on the forklift components replacement

1. Injection timing: Measure and correct and adjust as required.

2. Draining of sedimenter: Inspect and correct and replace as required.

1. Oil clutch function and oil leakage: Inspect and correct and replace as required.

- Torque converter and transmission:

1. Stall test and oil pressure measurement: Measure and correct and adjust as required.

1. Tank and oil strainer: Clean

1. Torque converter case: lubricant replacement, lubricate with Automatic transmission fluid

2. Oil tank: lubricant replacement, lubricate with Hydraulic oil

3. Tilt steering locking mechanism: inspect and service, lubricate with MP grease

4. Oil pump spline shaft: inspect and service, lubricate with Molybdenum disulfide grease

Note: In case of the hard operating condition, the service interval of 170 hours or 1 month may be recommendable.;