Toyota Forklift PRE140E

Keep the area where servicing activities are performed clean. Oil or water will make the floor slippery.

Use the correct working position. Service activities often involve kneeling or bending forward. Try sitting on a toolbox, for example, to relieve the strain on your knees and back.

Loose articles and jewellery may become trapped in the moving parts of the truck. So never wear loose articles or jewellery while working on the truck.

Use the correct tools for the work you are carrying out.

Keep all tools well maintained.

Store and transport old oil according to applicable local regulations.

Do not flush solvents, etc. down the drain unless they are intended to be disposed of in this way. Follow the local disposal regulations.

Heated paint gives off harmful gases. So use sanding or a paint stripper to remove the paint at least 100 mm around an area where any welding/grinding is to take place.

Area where servicing activities are performed clean

No loose articles or jewellery worn while working on the truck

Correct tools used for the work

Old oil stored and transported according to applicable local regulations

No solvents flushed down the drain unless intended for disposal

Sanding or a paint stripper used to remove the paint at least 100 mm around an area where any welding/grinding is to take place

Area where servicing activities are performed clean

No loose articles or jewellery worn

Correct tools used for the work

Old oil stored and transported according to local regulations

No solvents flushed down the drain unless intended

Sanding or a paint stripper used to remove paint for welding/grinding

Ensure the area where servicing activities are performed is clean

Use the correct working position

Avoid wearing loose articles or jewellery while working on the truck

Use the correct tools for the work you are carrying out

Ensure all tools are well maintained

Store and transport old oil according to applicable local regulations

Do not flush solvents, etc. down the drain unless they are intended to be disposed of in this way

Use sanding or a paint stripper to remove the paint at least 100 mm around an area where any welding/grinding is to take place

To ensure that you work safely and to prevent accidents while working on a truck, remember the following:

Area where servicing activities are performed clean

No loose articles or jewellery worn while working on the truck

Correct tools used for the work

Old oil stored and transported according to applicable local regulations

No solvents flushed down the drain unless they are intended to be disposed of in this way