SULLAIR Air Compressor LS-16 50HP

Clean the return line strainers

Lubricate the Sullicon Control linkage

Replace the fluid filter element and gasket

Drain the sump and change the compressor fluid

Check the fluid level in the sump

Add necessary amount of fluid if level is low

Observe instrument panel gauges for correct readings

Are all gauges showing correct readings?

Perform a general check on the overall compressor

Remove the old element and gasket using a strap wrench

Apply a light film of fluid to the new gasket

Hand-tighten new element until new gasket is seated in the gasket groove

Continue tightening element by hand an additional 1/2 to 3/4 turn

Clean exterior of air filter housing

Clean interior of housing using a damp cloth

Replace elements and reassemble in reverse order of disassembly

Clean the return line strainers

Verify that all cleaned components are reassembled correctly

Ensure the work area is clean and free of debris