The Stryker ProCuity Bed 3009 is a state-of-the-art hospital bed designed for patient comfort and safety. This versatile asset features advanced technology for efficient care, making it an essential tool for healthcare facilities aiming to enhance patient outcomes and streamline operations.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for Stryker ProCuity Bed 3009

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Stryker ProCuity Bed 3009

Create an account to install this asset package.

Maintenance Plans for Stryker ProCuity Bed Model 3009

Integrate maintenance plans directly into your work orders in MaintainX.

ProCuity Bed Cleaning

CAUTION: Do not clean, disinfect, service, or perform maintenance while the product is in use.

Always unplug the power cord from the wall outlet when large spills occur near the circuit boards, cables, and motors.

Remove the occupant from the product, clean up the fluid, and inspect the product. Fluids can cause unpredictable operation and decreased functionality of any electrical product. Do not return the product to service until dry and tested for safe operation.

Hand wash all exposed surfaces of the product with a mild detergent by spray or pre-soaked wipes.

Follow the cleaning solution manufacturer’s instructions for appropriate contact time and rinse requirements.

Dry the product before you return it to service.

NOTE! Avoid oversaturation. Do not allow the product to remain wet.

Sign off on the bed cleaning

Run this procedure

1 Year ProCuity Bed Preventive Maintenance

Warning: Remove the product from service before you perform the preventive maintenance inspection. Service only by qualified personnel.

All fasteners are secure

Apply brake pedal and push on bed to confirm that all casters lock

Footboard and head end siderails flash when brakes are not applied

Steer caster locks and unlocks

Siderails move and latch in the highest and intermediate positions

Fowler CPR release operable on both sides

IV pole is intact and operable

Foley bag hooks intact

Run this procedure

ProCuity Bed Cleaning and Disinfecting with SideKick Wipes

Cleaning Procedure

Wipe down the external product surface with a fresh, clean wipe to remove all visible soils

Repeat as necessary until the external product surface is visibly clean

Wipe dry with a cloth or allow the external product surface to air dry before you return the product to service

Disinfecting Procedure

Clean first

Wipe down the external product surface with a fresh, clean wipe until wet

Allow the external product surface to remain wet for two minutes at room temperature

Wipe dry with a cloth or allow the external product surface to air dry before you return the product to service

Run this procedure

ProCuity Bed Disinfecting

CAUTION: Do not clean, disinfect, service, or perform maintenance while the product is in use.

Always unplug the power cord from the wall outlet when large spills occur near the circuit boards, cables, and motors.

Always wipe down with clean water (or 70% isopropyl alcohol, if using Virex® TB) and dry each product after disinfecting.

Recommended disinfectants for this product’s surfaces include: Quaternary, Phenolic, Chlorinated bleach solution, Alcohol, Accelerated hydrogen peroxide.

Did you follow the disinfectant solution manufacturer’s dilution recommendations?

Did you apply the recommended disinfectant solution by spray or pre-soaked wipes?

Did you hand wash all exposed surfaces of the product with the recommended disinfectant?

Did you dry the product before you return it to service?

NOTE: Avoid oversaturation. Do not allow the product to remain wet.

Run this procedure