Skyjack Telescopic Boom Lifts SJ40 T+

Main Power Disconnect Switch: Cables and switch tight and in working order.

Battery Trays: Trays and covers are latched tightly and no missing components.

Batteries: No damage, tight connections, and sufficient fluid levels if necessary. Clean terminals and cable ends.

Battery Charger: Correctly attached and no damage.

Base Control Console: Operate the switches and make sure they all operate correctly. No damage or missing components.

Emergency Power Unit: Tight fittings and hoses and no damage or leaks. Tight wire connections, no missing components.

Manifolds: Tight fittings and hoses and no damage or leaks. Tight wire connections, no missing components, and correctly working valves.

Hydraulic Tank: Filler cap closed tightly and no damage or leaks.

Hydraulic Return Filter: Correctly attached and no damage, missing components, or leaks.

Railings and Gate: Correctly attached and no damage or missing components.

Platform Floor: Correctly attached and no damage or missing components.

Footswitch: Correctly attached. Operates correctly with no modifications.

Fall-Protection Anchorage: Anchorages are correctly attached and no damage.

AC Power Socket: No obstructions, dirt, or damage.

Platform Control Console: Operate the switches and make sure they all operate correctly. No damage or missing components.

Manual Storage Box: Manuals and documents are in storage box, in good condition, and you can read them.

Sign off on the platform maintenance

Rotary Actuator(s): No damage or missing components. Tight fittings, hoses, and bolts and no leaks.

Jib: No damage or missing components. Tight hoses and bolts and no leaks.

Boom: No damage or missing components. No deformation or cracks in welds. Tight fittings, hoses, bolts, and pins. No leaks.

Cable Track: No damage or missing components.

Wear Pads: No damage, wear, or missing components. Fasteners tight.

Riser: No damage or missing components. No deformation or cracks in welds. Tight fittings, hoses, bolts, and pins. No leaks.

Cylinders: No damage or missing components. Tight fittings and hoses and no leaks. Pins and bushing are tight and correctly installed.

Control Cables and Hoses: No damage or missing components. No leaks.

Wire Ropes: No damage or missing components. Tight jam nuts. No spring gaps.

Base Weldment: No cracks or deformation

Base Electrical Panel: Correctly attached and no damage. Tight wire connections and fasteners

Axles: Correctly attached and no missing components. Tight fittings and hoses and no leaks. Make sure the axles and drive shaft are lubricated

Electric Drive Motor: Correctly attached and no damage. Tight wire connections and fasteners

Steer Assembly: Correctly attached and no missing components. Tight fittings and hoses. No leaks, damage, or wear

Torque Hubs: Correctly attached and no damage or missing components. Tight fittings, hoses, and bolts. No leaks

Wheel Motors: Correctly attached. No damage or missing components

Wheel/Tire Assembly: Do a check of all tires for damage, wear, and correctly aligned

Sign off on the 200 Daily / 200 Hourly Base Maintenance

Radiator coolant condition check

Oscillating Cylinders mounting bolts torque seal check

Wheel/Tire Assembly check for loose bolts and wheel nuts torqued as recommended