RedMax Grass Trimmer BCZ260S

Warning: Only trained personnel should perform this maintenance

Enter the type of spark plug used

Note: Using any spark plug other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

Is the spark plug tightened correctly?

Enter the tightening torque in N.m.

Warning: Inspect the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired immediately.

Muffler clean and free of damage or corrosion

Spark arrester clean and free of red hot carbon

All screws, nuts, and bolts tightened and replaced as necessary

No oil or grease in between the clutch lining and drum

Sign off on the Stick Edger 100 Hourly Maintenance

fuel leaks, fuel spillage: wipe out

fuel tank, air filter, fuel filter: inspect/clean: replace, if necessary

idle adjusting screw: see ADJUSTING IDLING SPEED (p.12): replace carburetor if necessary

1. When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2. When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

• Warm up the engine before adjusting the idling speed.

throttle lever, ignition switch: check operation

cutting parts: replace if something's wrong

fuel tank, air filter, fuel filter: inspect/clean

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

• Unnecessary wear to engine parts

Clean the filter every 25 hours, or more regularly if conditions are exceptionally dusty. (MA2a)