Pitco Gas Fryer SSH55TR

Unscrew filter strainer cap from pickup tube and gently tap to dislodge crumbs

Use a clean cloth to remove remaining crumbs and reattach strainer cap

Filter Pickup Assembly Cleaning

Scrape loose debris and crumbs from filter pickup assembly and filter pan with filter scoop shovel

Remove filter pickup and place in pot sink, power soak sink or dishwasher for cleaning

Ensure all surfaces are rinsed thoroughly and dried before re-assembly

Wipe filter pan with clean damp cloth and food grade detergent

Wear apron, heat resistant gloves, and goggles for protection

Pull the blue drain handle down to drain oil/shortening into the filter pan

Pull the red handle to turn the pump on to circulate oil/shortening through the filter media

Lift the blue drain handle up to refill the tank

Push the red handle to deactivate the pump when the tank is filled

Is the oil/shortening level above the minimum level line?

Electrical Connections and Harnesses

Check electrical connections and harnesses for integrity

Check temperature probes for carbon build up and plating

Clean temperature probes if carbon build up or plating is found

Check proper mounting of probes and sensors

Ensure all fasteners are secure

Detach the pickup tube from the filter pickup assembly

Reinstall the filter pickup assembly

Gas line and retention system check

Is the power supply disconnected?