MAN Diesel & Turbo SE Generator Set 6L23/30H Mk2

Ensure the engine is in operation before drawing the sample

Use a clean and dry sample bottle

Draw the lubricating oil sample before the filter

Close the sample bottle immediately after filling

Provide sufficient identification for the sample bottle

Send the lubricating oil sample for examination

Enter the pH value of the feed water

Enter the conductivity of the feed water

Enter the hardness of the feed water

Enter the oxygen content or surplus at oxygen binder of the feed water

Gather necessary equipment for checking fresh water quality

Gather equipment for testing concentration of additives

Measure water hardness using the testing kit

Measure pH value using the testing kit

Measure chloride content using the testing kit

Is the coolant in the system within the specified range according to the maintenance schedule?

Ensure the engine is at full load before starting dry cleaning

Record the current exhaust gas temperature before the turbine

Set working air pressure between 5-7 bar

Select cleaning agents to be used

Inject granules into the exhaust gas line before the gas inlet casing of the turbocharger

Measure the exhaust gas temperature after cleaning

Enter the pH value of the condensate

Enter the conductivity of the condensate

Is the pH value within the acceptable range?

Is the conductivity within the acceptable range?