Liebherr Commercial Freezer BGPv 6520

Warning: Ensure the dust collector is unplugged before starting the cleaning process.

Dust filter removed by lifting upwards

Dust filter cleaned with water and detergent

Sign off on the dust collector cleaning

This test checks the function of the internal and any external connected alarm device. The appliance does not stop its refrigerating function during this test.

Press bell + arrow down for 5 seconds.

Enter the displayed temperature value

Check if the temperature value is rising by 0.1°C every 2 seconds.

Check if the upper alarm limit symbol appears in the display when the upper alarm limit is reached.

Check if an external alarm unit connected to the floating alarm output is activated.

Check if the temperature value continues to rise up to 0.2°C above the upper alarm limit.

Check if the same process takes place automatically for the lower alarm limit.

Check if the lower alarm limit symbol appears in the display.

Warning: Ensure the freezer is unplugged before starting the procedure

Is the drain hose with an R 3/4 connection fitted to the underside of the appliance?

Is the water collected in the interior during cleaning being drained off?

Upload a photo of the fitted drain hose

Sign off on the freezer water drain cleaning

WARNING: Before cleaning, always disconnect the appliance from the mains. Pull out the plug or switch off the fuse.

CAUTION: Risk of damage to the appliance components and risk of injury due to hot steam. Do not use steam cleaning equipment to clean the appliance.

Appliance disconnected from the mains?

Steam cleaning equipment not used?

No cleaning water penetrated into the electrical components?

All parts dried well with a cloth?

Used a commercially available stainless-steel cleaning agent for stainless-steel appliances?

Type plate on the inside of the appliance not damaged or removed?