Kohler Vertical Crankshaft Engine CV462

Ensure the engine is warm from operation

Remove the oil drain plug and oil fill cap/dipstick

Allow ample time for complete drainage

Reinstall the drain plug and tighten to 13.6 N·m (10 ft. lb.) torque

Fill the crankcase with new oil to the 'F' mark on the dipstick

Precleaner Removal and Cleaning

Remove the precleaner from the paper element

Wash the precleaner in warm water with detergent

Rinse the precleaner thoroughly until all traces of detergent are eliminated

Squeeze out excess water (do not wring)

Allow the precleaner to air dry

Saturate the precleaner with new engine oil

Check the level of electrolyte regularly

Is the electrolyte level within the recommended range?

Describe any issues with electrolyte level

Ensure the following parts are clean

Wash the cables, terminals, and external surfaces with a baking soda and water solution

Clean external surfaces as necessary

Reinstall other cooling shrouds

Clean the area around the base of the spark plug

Blow out the cavity with compressed air

Spark Plug Removal and Inspection

Check the condition of the spark plug

Is the spark plug worn or questionable for reuse?

Replace the spark plug if necessary