Victory Refrigeration V-Series Reach-In Refrigerator VR-2

Remove loose food particles from interior floors, walls, and ceiling

Scrub all interior surfaces with warm detergent solution

Rinse with clear water and allow to air dry

Reinstallation and Power Restoration

Clean surface with a sponge and cleaning solution

Ensure the cleaner used is non-abrasive and chlorine-free

Polish with a soft cloth, wiping with the grain of the metal

Wipe with a film cutting agent to maintain shine

Verify that the motor-compressor is a sealed unit

Are the condenser and evaporator motors equipped with lifetime oiled bearings?

Check cabinet temperature with a hand-held thermometer

Does the cabinet grill thermometer match the test thermometer within ±1°F?

Remove the dial thermometer lens with a small screwdriver

Adjust the temperature needle using a small screwdriver

Insert a small screwdriver in the slotted screw on the needle

Hold the wide end of the needle to keep it from moving

Turn the screw clockwise or counterclockwise to adjust as needed

Release the needle and remove the screwdriver

Verify new needle setting with the test thermometer

Ensure the gasket and door are at room temperature

Soak the gasket in warm water if necessary to make it more pliable

Align new gasket frame on the door retainer strip

Press each corner of the gasket into the retainer strip

Press roll the gasket into place around the entire perimeter of the door