Victory Refrigeration V-Series Reach-In Refrigerator VR-1

Ensure the gasket and door are at room temperature

Soak the gasket in warm water if necessary to make it more pliable

Align new gasket frame on the door retainer strip

Press each corner of the gasket into the retainer strip

Press roll the gasket into place around the entire perimeter of the door

Check condenser and evaporator motors

Clean surface with a sponge and cleaning solution

Did you use a non-abrasive cleaner without chlorine?

Polish with a soft cloth, wiping with the grain of the metal

Wipe with a film cutting agent to maintain shine

Disconnect power by switching circuit breaker to 'OFF' position

Remove the two screws on the inside of the grill at each end

Lift the panel up and straight out

Clean the condenser, motor-compressor, and related parts using a vacuum cleaner with proper brush attachments

In extreme cases of dust and grease buildup, clean the condenser fins

Turn circuit breaker to 'ON' position

Remove loose food particles from interior floors, walls and ceiling

Scrub all interior surfaces with warm detergent solution

Rinse with clear water and allow to air dry

Reinstallation and Power Restoration