John Deere Tractor 6105M

Viscous fan checked by John Deere™ dealer

Glow plugs checked by John Deere™ dealer (2000 Hourly Maintenance)

Valves adjusted by John Deere™ dealer (3000 Hourly Maintenance)

Coolant changed (if COOL-GARD™ II is used and coolant is checked annually) (6000 Hourly Maintenance)

Accumulator of TLS™ changed by John Deere™ dealer (10000 Hourly Maintenance)

Retrieve the diagnostic trouble codes, rectify errors, and then delete the diagnostic trouble codes.

Check that all lights and headlights are functioning properly.

Cab support, check torques of fixing screws (see Service - Every 250 Hours).

Drawbar - Check torque on attaching screws (see Service - Every 250 Hours).

Height-adjustable trailer hitch - Check torque on attaching screws (see Service - Every 250 Hours)

Trailer hitch - Check torques of attaching screws (see Service - Every 250 Hours).

Pick-up hitch - Check torque on attaching screws (see Service - Every 250 Hours).

John Deere™ front loader mounting frame - Check torques of attaching screws (see operator's manual and installation instructions of the front loader)

Front hitch - Attaching frame, check torque on attaching screws (see Service - Every 250 Hours).

Check that all lights (including headlights) are functioning properly

Drain water and sediment from fuel filter

Remove any dirt from area surrounding the engine

Clean the radiator and condenser, fins and screens

Check compressed air tank for condensed water. If condensed water drains out, replace air-drier cartridge, otherwise do this every 1500 hours or every 2 years at the latest (see Service - Every 1500 Hours or 2 Years).

Check the transmission/hydraulic system

Park tractor so that it is level.

Check nitrogen pressure in accumulator on TLS front-wheel drive axle

Transmission/Hydraulic system oil heated up?

Tractor parked level with all implements lowered?

Engine shut off and ignition key withdrawn?

Upload a photo of drained oil from transmission/hydraulic system

Transmission intake screens cleaned?

Tighten drain screws to 50 Nm (37 Ib-ft)

Upload a photo of filled transmission/hydraulic oil into the transmission housing

Inspect seat belt for damage and ensure proper working order

Use coolant test strips to check engine coolant

Engine - Check drive belt for wear (or every 500 hours, whichever occurs first)

Change engine oil (or every 500 hours, whichever occurs first)

Front loader mounting frame - Check torques of fixing screws (see operator's manual and installation instructions of the front loader)

Change activated carbon filters of cab, if equipped (or every 500 hours, whichever occurs first)

Sign off on the tractor maintenance