John Deere Tractors X320

Park machine safely on level surface.

Put drain pan under drain valve.

Remove drain cap and drain oil into drain pan. Allow oil to drain completely.

Wipe dirt from around oil filter.

Place a drain pan or funnel under oil filter tray.

Dipstick removed and wiped with clean cloth

Dipstick installed in tube but not tightened

38 and 42 Mowers: Lubricated two mower spindle grease fittings with two pumps of grease

48 and 54 Mowers: Lubricated three mower spindle grease fittings with two pumps of grease

Lubricated grease fitting on each spindle with one or two pumps of general all-purpose grease

Turned wheels to distribute grease on spindles

Lubricated front axle center pivot grease fitting with one or two pumps of general all-purpose grease

Lubricating Lift Pedal Assembly

Lubricated grease fitting for lift pedal with enough grease to flush out dirt

Park machine safely on level surface

Put drain pan under drain valve

Remove drain cap and drain oil into drain pan

Wipe dirt from around oil filter

Place a drain pan or funnel under oil filter tray

Thumb screws turned 1/4 turn counterclockwise and cover removed

Air filter clamp loosened and filter element lifted out of the air cleaner base

Foam precleaner removed from the paper filter element

Foam precleaner washed, rinsed, and dried

Foam precleaner replaced if damaged or missing

Paper filter element inspected and replaced if damaged or dirty

Air cleaner base cleaned carefully