Joerns Healthcare Bed Frame ECS9

Maintenance/Inspection Information

Visually inspect the bed and accessories for broken welds or cracks

If any broken welds or cracks are found, remove bed from service immediately and replace affected parts

If necessary, contact Technical Support, 800-826-0270, for assistance. Tighten any loose hardware.

To ensure maximum life of your product, follow all warnings and cautions in the User Manual and maintain your bed with care, as outlined below. The maintenance required will be dictated by your bed's usage and care - a thorough inspection should be conducted monthly.

Observe bed operation and report any discrepancies or problems to Joerns Healthcare Technical Support at 800.826.0270

Caution: Possible damage to electrical parts, and/or shock hazard.

Warning: Possible Injury or Burns. Do not use flammable liquids or solvents to clean the bed, its components, or surfaces placed on top of it.

Clean all the electrical components (actuators, control box, pendant and cords) on your Joems® bed with damp, well-wrung out cloth. Excess water in or on electrical parts, could damage these components.

Do not submerge the pendant in liquid.

Your Joerns bed features a durable, baked-on epoxy finish that is easily cleaned with a mild solution of antiseptic cleaner and warm water. Read and follow all label instructions on your cleaning products.

Wood veneer surfaces should be maintained by cleaning with furniture cleaner or polish.

Sign off on the bed frame cleaning