Hussmann Remote Air-Cooled Condenser MXK-02

- For maximum efficiency, air-cooled condensers should be cleaned of lint and dust every 4 to 6 months so that airflow is not restricted. More frequent cleaning may be necessary under severe conditions.

WARNING: No chemical cleaners should be used at any time on the coil as severe damage may occur.

• Improper service and maintenance may cause personal and/or property damage.

• Contact qualified installer, servicer or distributor for information or assistance.

• Always wear gloves, protective clothing and safety glasses.

• Employ dust mask as required.

• Have quenching cloth and fire extinguisher available.

• Follow all Local and National building and electrical codes Electrical

Warning: Ensure all power to the unit is off before performing any electrical work.

Check if the electrical power disconnect switch is in the “OFF” position.

Check if all power to the unit is off from the source.

Inspect and tighten electrical connections if required.

Check fans for correct rotation during startup phase.

Check if fans are pushing air into the coil surface.

Note down any issues found during the inspection.