Hussmann Hot Island End Case TY3-4X5E-H

DANGER! ALWAYS DISCONNECT ELECTRICAL POWER AT THE MAIN DISCONNECT WHEN SERVICING OR REPLACING ANY ELECTRICAL COMPONENT.

CAUTION! The Heat lamps used in these cases get EXTREMELY HOT! NEVER touch a lamp until the case has had ample time to cool down!

Turn light switch to OFF before replacing any lighting components.

Using a protective glove, disconnect light bulb by unscrewing it counter clockwise and gently remove it from lamp holder

Insert new light bulb by inserting it into the lamp holder and turning it clockwise until snug. Do Not Overtighten!

Plug fixture back in and turn on light switch.

Sign off on the lamp replacement

Power switch turned OFF and power cord unplugged

Unit cooled down before maintenance or cleaning

DO NOT submerge or saturate with water. Unit is not waterproof. Do not operate if unit has been submerged or saturated with water.

Non-abrasive cleaner used for surface stains

Small brush and mild soap used for hard to reach areas

NOTICE! Use non-abrasive cleaners only. Abrasive cleaners could scratch the finish of the unit, marring its appearance and making it susceptible to soil accumulation.

High pressure water hoses not used