Hoshizaki Modular Flaker F-1500MAH-C

Ensure only qualified service technicians are servicing the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Close the water supply line shut-off valve.

Ensure only qualified service technicians are servicing the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance.

Ensure only qualified service technicians are servicing the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Air Filters Inspection and Cleaning

Inspect the air filters for dirt and debris.

Clean or replace water hoses if necessary

Clean the condenser using a brush or vacuum cleaner if necessary

Inspect Upper Bearing (extruding head)

Inspect Lower Bearing and O-Ring (lower housing)

Replace upper bearing if wear exceeds factory recommendations