ELEPHANT CHAIN BLOCK Chain Hoist SA-0.49

Ensure no modifications are made to the electric chain hoist and its accessories.

Use only genuine parts made by the manufacturer.

Avoid shortening or lengthening the load chain.

Turn off the power source before maintenance, inspection, or repair.

Ensure only authorized specialists perform maintenance, inspection, or repair.

Perform maintenance, inspection, or repair with the hoist unloaded.

Repair any disorder found during maintenance or inspection before re-operating the hoist.

Set up a warning plate indicating 'Under working', 'Under Inspection', or 'Passing the current prohibited' during maintenance.

Switch OFF the power source before starting maintenance.

Ensure maintenance is performed by qualified personnel or contact a dealer.

Confirm the hoist is in a non-loading condition.

Do not use the hoist if any abnormalities are found.

Ensure the electric chain hoist is in a non-loading state.

Lower the hoist to about 10 cm before the safety actuation point.

Switch OFF the power source and confirm surrounding safety.

Ensure no modifications have been made to the electric chain hoist and its accessories.

Verify that only genuine parts are used in the electric chain hoist.

Confirm that the load chain has not been shortened or lengthened.

Turn off the power source before maintenance, inspection, or repair.

Ensure only authorized specialists carry out maintenance, inspection, or repair.

Verify the electric chain hoist is unloaded before maintenance, inspection, or repair.

Check for any disorders during maintenance or inspection and repair immediately before re-operation.

Pre-Operation Warnings and Notices

Ensure no modifications are made to the electric chain hoist and its accessories.

Verify only genuine parts are used.

Confirm no shortening or lengthening of the load chain has been done.

Ensure power source is turned off before maintenance, inspection, or repair.

Verify only authorized specialists perform maintenance, inspection, or repair.

Ensure maintenance, inspection, or repair is carried out with the hoist unloaded.

If any disorder is found, ensure repair is made before re-operating the hoist.

Set up a warning plate indicating 'Under working' or similar during maintenance.

Switch OFF the power source of the electric chain hoist.

Ensure the hoist is in a non-loading condition (hoisting no load).

Confirm the safety of the surrounding area.

Ensure maintenance is performed by a person with specialized knowledge or a certified dealer.

Check the following conditions for double or triple load chains

Pull out the chain stop bolt and check for deformation.

Is the chain stop bolt bent or visibly deformed?