Climate Master Heat Pump GLV120BUC3AALFS

Check the shipment against the bill of lading

Inspect the carton or crating of each unit for damage

Assure the carrier makes proper notation of any shortages or damage on all copies of the freight bill

Complete a common carrier inspection report for any damage or shortages

Was any concealed damage discovered during unloading?

Report concealed damage to the carrier within 15 days of receipt of shipment

Check the type of water application

Is the system installed in an area with high mineral content (125 P.P.M. or greater)?

Has a periodic maintenance schedule been established with the owner?

Describe the periodic maintenance schedule

Is periodic coil cleaning necessary?

Use standard coil cleaning procedures compatible with heat exchanger material and copper water lines.

Ensure the cabinet is elevated from the floor

Verify that cleaning materials are ready and appropriate

Use a mild detergent for cleaning

Ensure no water remains in contact with the cabinet

Dry the cabinet thoroughly to prevent corrosion

Inspect the cabinet for any signs of corrosion

Inspect the air coil for dirt accumulation

Handle with care to avoid injury

Ensure that electrical power to the unit is disconnected

Install the system with the supply hose connected directly to the return riser valve using a single length of flexible hose

System Filling and Air Bleeding

Open all air vents and fill the system with water without overflowing

Bleed all air from the system and pressurize

Check the system for leaks and repair as appropriate

Use the manual air bleed valve at the top of the reheat coil for ClimaDry-equipped units