Clark Electric Rider Lift Trucks ECX 32

All controls and systems are functioning correctly

Lights are functioning correctly

All other safety equipment and accessories are properly mounted and working correctly

Sign off on the lift truck functional test

Check the condition of the load backrest.

Inspect the welds on the load backrest and carriage.

Check that the mounting fasteners are not missing and properly tightened.

If the load backrest has been removed, make sure that fork stops have been installed on each side of the carriage.

CAUTION! If the truck is not equipped with a load backrest, or it has been removed, then fork stops must be installed on each side of the carriage to prevent the forks from being unintentionally forced off of the carriage during operation.

Sign off on the load backrest check

Drain and replace drive axle fluid

Check/lubricate steer axle wheel bearings

Sign off on the lift truck maintenance

Inspect the load forks for cracks, breaks, bending and wear. The fork top surfaces should be level and even with each other. The height difference between both fork tips should be no more than 1.5% of the blade length.

WARNING! If the fork blade heel is worn down by more than 10 percents, the load capacity is reduced and the fork must be replaced.

Inspect the forks for twists and bends. Put a 2\ thick metal block

If the fork blades are obviously bent or damaged, have them inspected by a trained maintenance person before operating the truck.

Inspect the fork locating pins. Be sure they are not damaged or broken and operate freely and lock correctly. Check the fork stop pins for secure condition.

Sign off on the fork inspection

Always maintain a lift truck in a clean condition. Do not allow dirt, dust, lint, or other contaminants to accumulate on the truck.

Is the truck free from leaking oil and grease?

Are the controls and floorboards clean, dry, and safe?

The environment in which a lift truck operates determines how often and to what extent cleaning is necessary.

Is the truck operating in a high level of dirt, dust, or lint environment?

IMPORTANT! Do not steam, Pressure wash, or use liquid spray cleaner on Electronic control panel.

Is the lift truck air cleaned at every PM interval?

Use an air hose with special adapter or extension having a control valve and nozzle to direct the air properly.

Enter the air pressure used for cleaning