Bobcat Track Loader MT85

Check level of Engine Oil and add as needed

Check Engine Air Intake Ducting for loose connections damaged components

Clean debris from radiator cooling package, air conditioning condenser (if equipped), rear grilles, and engine compartment. Check coolant level COLD and add premixed coolant as needed to Engine Cooling System

Drain water and sediment from fuel filter.

Check Hydraulic Fluid level and add as needed

Lubricate Lift Arms, Cylinders, Bob-Tach Pivot Pins & Wedges / CII Pivot Pins & Mounting Pins, Undercarriage Rollers & Idlers with multipurpose lithium based grease

Check for correct function of Reverse Stop Panel (If Equipped), Neutral Start Interlocks, and Lift / Tilt Lockouts Systems. Clean dirt and debris from moving parts

Check for proper function of Parking Brake

Check for function of Indicators and Lights. Clean or repair as needed

Adjust the engine valve clearance

Replace hydraulic fluid and filters

Replace the coolant every 24 months

Sign off on the loader maintenance

Engine Valve Clearance Adjustment

Engine valve clearance adjusted?

Hydraulic Filter and Reservoir Breather Cap Replacement

Hydraulic filter and reservoir breather cap replaced?

Drive Belt (Hydrostatic) Condition Check

Condition of Drive Belt (Hydrostatic)

Sign off on the loader maintenance

Hydraulic Hoses and Tubelines checked for damage and leaks

Controls checked for correct operation

Undercarriage checked for loose bolts and nuts

Track tension checked and adjusted as needed

Sign off on the 50 hours loader maintenance

Electrolyte level in the battery

Drive Belts (Alternator / Water Pump / Fan Drive) checked

Spark chamber of Spark Arrester Muffler cleaned

Fuel Filter replaced (every 250 hours or every 12 months)

Function of Lift Arm Lockout manual bypass control checked (every 250 hours or every 12 months)

Sign off on the 100 Hours Loader Maintenance