Advantage Temperature Control Unit SK-1035-LEP-21D1

Disengage process operations according to the procedure outlined in section 3.4.

Ensure all system pressure is relieved and the unit's pressure gauges read '0'.

Verify the Power light on the display is 'off'.

Remove the thermoformed front panel and set aside.

Open the hinged electrical cabinet panel cover.

Remove the following connections and components

Disengage process operations and verify all system pressure is relieved and the unit's pressure gauges read '0'.

Disengage main power supply and verify the Power light on the display is 'off'.

Remove the lift-off access panel and set aside.

Disconnect the valve wiring harness.

Remove the AVT valve's drip cover.

Motor Driver/Gearbox Components Service

Remove the 2 mounting screws securing the motor/gearbox assembly to the valve bracket.

Carefully separate the motor/gearbox from the attached coupling from the valve assembly.

Consult with the Advantage Service Department to determine if your unit can be converted. Record the outcome.

Enter the Serial Number of the unit.

Call 317-887-0729 for consultation.

Consult factory for other power conversions and record details.

Items Requiring Replacement or Rewiring

Check items that require replacement or rewiring

Disengage operations and ensure all system pressure is relieved

Verify the unit's pressure gauges read '0'

Verify the Power light on the display is 'off'

Remove the lift-off access panel and set aside

Drain machine by removing the pump casing drain plug

Call the factory for diagnostic assistance

Was the control instrument determined to be at fault?

Send a new or reconditioned instrument as a replacement if the instrument is at fault

Return the defective instrument freight pre-paid for full credit

Was the defective instrument returned?

Pay for the instrument if it was not returned

Out of Warranty Service Incident

Call the factory for diagnostic assistance