ABB Charging Station Terra 94 CCT

Ensure only authorized or trained personnel perform maintenance

De-energize the EVSE before maintenance activities

Inspect external parts of the EVSE for any visible damage or wear

Use cleaning agent with pH value between 6 and 8

Do not apply high-pressure water jets

Visual Inspection on External Parts

Inspect the external parts of the EVSE for any damage or issues

Are there any obstacles (animals, insects, leaves, etc.) reducing the heat exchanging capacity of the EVSE?

Ensure only authorized or trained personnel perform operations inside the EVSE

Refer to section '9.3. Total de-energization of the EVSE' to de-energize the EVSE for maintenance activities

Routine Maintenance and Component Replacement

Record any routine maintenance performed based on environmental conditions and number of charging sessions

Note any scheduled component replacements performed

Ensure that only authorized or trained personnel are performing the maintenance.

Verify that the EVSE is de-energized according to section '9.3. Total de-energization of the EVSE'.

Clean or replace the internal parts of the EVSE

Confirm that all replaced or cleaned parts are properly reinstalled.

Verify that the EVSE is re-energized and operational.

Environmental conditions and number of charging sessions notes

Scheduled Component Replacement

Contact ABB E-mobility for Service Level Agreements

De-energization procedure reference

Check functionality of components