ABB Charging Station Terra 124 CCT

Ensure that only authorized or trained personnel are performing the maintenance.

Verify that the EVSE is de-energized according to section '9.3. Total de-energization of the EVSE'.

Clean or replace the internal parts of the EVSE

Confirm that the maintenance activity is not included in the Service Level Agreement (SLA).

Verify completion of the dedicated course by ABB E-mobility.

Ensure only authorized or trained personnel perform maintenance

De-energize the EVSE before maintenance activities

Inspect external parts of the EVSE for any visible damage or wear

Use cleaning agent with pH value between 6 and 8

Do not apply high-pressure water jets

NOTE: The routine maintenance schedule may vary depending on the environmental conditions and number of charging sessions of the EVSE.

NOTE: In addition to routine maintenance, a scheduled component replacement shall be performed to guarantee the continuity of operation of the EVSE. Contact ABB E-mobility for more information on available Service Level Agreements.

HAZARDOUS VOLTAGE: Operation on the inside of the EVSE shall be performed only by authorized or trained personnel. To de-energize the EVSE for maintenance activities refer to section “9.3. Total de-energization of the EVSE”

Check the functionality of the following components

Was the EVSE de-energized for maintenance activities?

Record any environmental conditions that may affect the maintenance schedule

Record the number of charging sessions since the last inspection

Note any scheduled component replacements performed

Ensure only authorized or trained personnel perform the inspection

De-energize the EVSE following section 9.3 instructions

Visual Inspection of External Parts

Inspect the following external parts for any damage or issues